About us · Lechler Process Technology B.V.

Engineered, built and serviced by one team in Brielle.

We design and build complete wet gas scrubber installations, with the piping, control cabinet, PLC and process analysers that run them, and we look after them once they are running. Engineering, workshop, panel building and service work side by side, as part of the Lechler Group.

Working on a stainless-steel scrubber section in the Lechler workshop Engineer working on a 3D scrubber model in Autodesk Inventor Calibrating a Gasmet gas analyser
Engineering in-house
3D design in Autodesk Inventor, electrical design in Eplan
Own workshop and panel building
Welding, assembly, control cabinets and PLC
Part of the Lechler Group
Lechler Process Technology B.V., Brielle

Who we are

Over 30 years of scrubber engineering in Brielle

Lechler Process Technology B.V. is a newly established, independent company within the Lechler Group. In Brielle it builds on more than thirty years of experience in engineering gas scrubbers and cooling towers, together with analytical technology. Specialists with long experience in these applications have joined the team.

We supply a scrubber as part of a larger project or as a complete turnkey installation: vertical and horizontal scrubbers that work as quenchers, droplet separators, dust scrubbers, chemical scrubbers or odour scrubbers, built in plastics such as PP, PE and GRP or in stainless steel.

What we do

Everything a scrubber installation needs

Each discipline sits in our own company, so the design, the steelwork, the control cabinet and the analysers are made for the same installation.

Engineering & design

Our draftsmen-constructors turn the engineering into a 3D design and production drawings, together with the workshop, and can perform stress analysis. Electrical diagrams and cabinet layouts are drawn in Eplan.

  • Autodesk Inventor
  • Stress analysis
  • Eplan
Custom engineering

Workshop & welding

Construction, welding and assembly of custom installations and small series in our own workshops, mostly in stainless steel.

  • MIG/MAG
  • TIG
  • AISI 304 / 316
Turnkey projects

Control cabinets & PLC

Cabinets are assembled, wired and tested in our panel building department. Our programmers write the PLC software from a functional description agreed with you.

  • Siemens PLC
  • Network / bus
  • Remote monitoring
PLC and remote support

Process analysers

Analysers that control the installation, configured and assembled by our engineers, on the installation or on their own skid. Our service engineers maintain and calibrate them.

  • Gasmet FTIR
  • Skid-mounted
  • Calibration
Analysers for scrubbers

How we work

From the first drawing to service after start-up

Custom installations are handled as projects. These are the steps a project goes through with us, from engineering to support on your site.

  1. 01

    Engineering

    Process design, 3D model and production drawings. The motor and instrument list is drawn up together with you.

  2. 02

    Workshop

    Construction, welding and assembly in our own workshops, mostly in stainless steel AISI 304 and 316.

  3. 03

    Control cabinet & PLC

    The cabinet is built, wired and tested in-house; the PLC is programmed from the functional description agreed with you.

  4. 04

    Analysers

    Process analysers are configured and assembled by our engineers, on the installation or on their own skid.

  5. 05

    FAT & SAT

    Pre-assembled and tested in our workshop, with a factory acceptance test together with you if you want one. On site, our technicians install and connect it and we commission it together with you.

  6. 06

    Training & service

    Training for your operators, maintenance and analyser calibration by our service engineers, and remote monitoring if you want it.

Control cabinet with Siemens PLC modules during wiring

Workshop & panel building

Built and tested in our own workshops

Custom installations and small series are built in our own construction, welding and panel building workshops. That lets us respond quickly to customer-specific wishes and test the installation before it goes to site.

  • Fronius welding equipment for MIG/MAG and TIG, mostly on stainless steel AISI 304 and 316
  • A construction workshop with a lathe, press brake, roller and profile roller
  • Cable selection, electrical diagrams and cabinet layout in Eplan; cabinets assembled, wired and tested in-house
  • Installations assembled as completely as possible in our assembly workshop, tested, and shown to you in a FAT if you want one

Lechler Group

Independent in Brielle, backed by the Lechler Group

Lechler Process Technology B.V. is a newly established, independent company within the Lechler Group. The group has worked in nozzle technology since 1879, is headquartered in Metzingen, Germany, and is owned by the Lechler Foundation and the Lechler family.

Our application knowledge, combined with the strength, stability and international capabilities of the group, makes us a reliable partner for scrubber-related process solutions and analytical applications.

Lechler places great importance on the responsible and efficient use of resources. We look closely at customer processes, especially where water, chemicals and energy are used, and work with customers to improve them in a sustainable way.

Founded
1879
Headquarters
Metzingen
Employees worldwide
Over 900
Subsidiaries worldwide
13
Nozzles produced per year
10 million
Products in the portfolio
45,000
Scrubber installation loaded on a truck for transport to site

New build, renovation, support

From a single scrubber to a turnkey installation

We can supply the scrubber as part of a larger project, or take care of the whole installation: piping, control cabinets, dosing systems, pumps, fans and all the instruments, installed, connected and commissioned on your site.

  • New-build installations, complete with instrumentation, control cabinet and PLC
  • Renovation and optimisation of existing process installations, often on site during a planned stop
  • Remote monitoring, agreed with your IT or network specialist, with data logging locally or in the cloud

We build with components from

  • KSB
  • Eriks
  • Endress+Hauser
  • Rittal
  • Phoenix
  • Siemens